California State University, Los Angeles California State University, Los Angeles 29 courses 16 total credits
The minor degree in Electrical and Computer Engineering (ECE) requires 16 semester units. This minor will not be available to students in the Electrical Engineering (EE) major. A minimum major GPA of 2.5 will be required to declare this minor. This minor provides students in related engineering and science programs with the opportunity to gain fundamental knowledge, develop skills in different groups of the ECE disciplines, and to participate in interdisciplinary studies. Completion of the minor in ECE will also prepare these students for graduate studies in ECE. Students declaring the ECE minor can request up to 4 units of the coursework in their major core requirement to be credited to this minor. They can also request up to 3 units of coursework in their major electives to be credited to this minor. The above-mentioned unit credits have to be approved by a faculty advisor in Department of Electrical and Computer Engineering . Students who take the following courses in this minor program need to fulfill all the prerequisites, and pre/co-requisites shown in parentheses. EE 2040 (Pre/Co-requisites: MATH 2120 , PHYS 2200 ) EE 2450 (Pre/Co-requisite: ENGR 1500 ) EE 3445 (Prerequisite: CS 2013 ) EE 3020 (Prerequisite: EE 2040 , Pre/Co-requisite: MATH 2150 ) EE 3040 (Pre/Co-requisite: MATH 2130 )
| Total Credits | 16 credits |
Core Course in the Minor (3 units)
| Code | Course Title | Credits |
|---|---|---|
| EE 2040 | Circuit Analysis I | 6 |
Category 1 (4 units)
Select one lab between EE 2049 and EE 3001.
| Code | Course Title | Credits |
|---|---|---|
| EE 2049 | Electrical Measurements and Circuits Laboratory | 1 |
| EE 2450 | Embedded System Programming I | 6 |
| EE 3001 | Numerical Analysis and Modeling Using MATLAB | 1 |
Category 2 (3 units)
| Code | Course Title | Credits |
|---|---|---|
| EE 3450 | Embedded System Programming II | 3 |
Category 3 (3 units)
Select one course from the following: (EE 4480 needs EE 4440 as its co-req.)
| Code | Course Title | Credits |
|---|---|---|
| EE 2440 | Digital Engineering | 6 |
| EE 3445 | Computer Organization | 3 |
| EE 4480 | Advanced Digital Design | 3 |
Category 4 (3 units)
Select one course from the following:
| Code | Course Title | Credits |
|---|---|---|
| EE 4440 | Computer Organization | 3 |
| EE 4450 | Embedded Architectures | 3 |
Category 1 (4 units)
Select one lab between EE 2049 and EE 3001.
| Code | Course Title | Credits |
|---|---|---|
| EE 2049 | Electrical Measurements and Circuits Laboratory | 1 |
| EE 2450 | Embedded System Programming I | 6 |
| EE 3001 | Numerical Analysis and Modeling Using MATLAB | 1 |
Category 2 (3 units)
| Code | Course Title | Credits |
|---|---|---|
| EE 3020 | Signals and Systems | 3 |
Category 3 (3 units)
Select one course from the following: (EE 3040 is the pre-req. of EE 4630. EE 3200 is the pre-req. of EE 4220.)
| Code | Course Title | Credits |
|---|---|---|
| EE 3040 | Probability, Random Variable, and Random Processes | 3 |
| EE 3200 | Analog Communication Systems | 3 |
Category 4 (3 units)
Select one course from the following: (EE 3040 is the pre-req. of EE 4630. EE 3200 is the pre-req. of EE 4220.)
| Code | Course Title | Credits |
|---|---|---|
| EE 4220 | Digital Signal Processing | 3 |
| EE 4630 | Machine Learning Principles and Application | 3 |
| EE 4820 | Biomedical Signal Processing | 3 |
Category 1 (4 units)
Select one lab between EE 2049 and EE 3001.
| Code | Course Title | Credits |
|---|---|---|
| EE 2049 | Electrical Measurements and Circuits Laboratory | 1 |
| EE 2450 | Embedded System Programming I | 6 |
| EE 3001 | Numerical Analysis and Modeling Using MATLAB | 1 |
Category 2 (3 units)
| Code | Course Title | Credits |
|---|---|---|
| EE 3810 | Sensors, Data Acquisition, and Instrumentation with Applications in Biomedical E | 3 |
Category 3 (3 units)
Select one course from the following: (EE 3700 is the pre-req. of EE 4710.)
| Code | Course Title | Credits |
|---|---|---|
| EE 3050 | Electric and Magnetic Fields | 3 |
| EE 3700 | Electronics I | 3 |
Category 4 (3 units)
Select one course from the following: (EE 3700 is the pre-req. of EE 4710.)
| Code | Course Title | Credits |
|---|---|---|
| EE 4710 | Analog Integrated Circuits | 3 |
| EE 4810 | Biomedical Devices | 3 |
Category 1 (4 units)
Select one lab between EE 2049 and EE 3001.
| Code | Course Title | Credits |
|---|---|---|
| EE 2049 | Electrical Measurements and Circuits Laboratory | 1 |
| EE 2450 | Embedded System Programming I | 6 |
| EE 3001 | Numerical Analysis and Modeling Using MATLAB | 1 |
Category 2 (3 units)
| Code | Course Title | Credits |
|---|---|---|
| EE 3020 | Signals and Systems | 3 |
Category 3 (3 units)
| Code | Course Title | Credits |
|---|---|---|
| EE 3420 | Introduction to Autonomous Robotic Systems (also listed as CS 3420, ME 3420) | 3 |
Category 4 (3 units)
| Code | Course Title | Credits |
|---|---|---|
| EE 3600 | Control Systems | 3 |
Category 1 (4 units)
Select one lab between EE 2049 and EE 3001.
| Code | Course Title | Credits |
|---|---|---|
| EE 2049 | Electrical Measurements and Circuits Laboratory | 1 |
| EE 3001 | Numerical Analysis and Modeling Using MATLAB | 1 |
| EE 3300 | Electric Machines | 3 |
Category 2 (3 units)
Select one course from the following: (EE 4300 is the pre-req of EE 4310. EE 3700 is the pre-req. of EE 4330, and EE 4340. Students selecting EE 3700 in Category 2 may select EE 4300 in Category 4.)
| Code | Course Title | Credits |
|---|---|---|
| EE 3700 | Electronics I | 3 |
| EE 4300 | Introduction to Power Systems Engineering | 3 |
Category 3 (3 units)
Select one course from the following: (EE 4300 is the pre-req of EE 4310. EE 3700 is the pre-req. of EE 4330.)
| Code | Course Title | Credits |
|---|---|---|
| EE 4310 | Power Systems Analysis | 3 |
| EE 4330 | Power Electronics | 3 |
Category 4 (3 units)
Select one course from the following: (Students selecting EE 3700 in Category 2 may select EE 4300 in Category 4. EE 4300 is the pre-req of EE 4320. EE 3700 is the pre-req. of EE 4340)
| Code | Course Title | Credits |
|---|---|---|
| EE 4300 | Introduction to Power Systems Engineering | 3 |
| EE 4320 | Electric Power Distribution | 3 |
| EE 4340 | Electromagnetic Energy Conversion | 3 |
Click a course code or title to read the full course description.
Our subject experts help with essays, research papers, case studies, discussion posts, and capstone projects for these programs β written from scratch to your course requirements.
Program and course information is reproduced from each university's published academic catalog for informational purposes and may change. Always confirm current requirements with your university. We are an independent academic support service and are not affiliated with or endorsed by the universities listed.
Expert guides on essay writing, citation styles, study skills, and academic success.
View All Articles
Learn how to write a good research question for a paper. Narrow your topic, identify a research problem, and create a focused question with practical examples.
Learn how to choose a research topic you can actually research. Discover how to narrow broad ideas, find reliable sources, and develop a focused research question.
Learn how to cite sources in a research paper using APA, MLA, and Chicago styles, with in-text citation examples and reference-list tips.